Graphical Display - Siemens SINUMERIK 840D sl Operating Manual

Machining the workpiece
3.10 Simulating a machining operation
Changing the display
You can increase or decrease the size of the simulation graphic and move it, as well as
change the segment.
3.10.6

Graphical display

Figure 3-1
Active window
The currently active window has a lighter background than the other view windows.
You can change the workpiece display here, e.g. increase or decrease the size, turn it and
move it.
Some of the actions that you perform in the active window also have a simultaneous effect in
other view windows.
Display of the traversing paths
● Rapid traverse = red
● Feed = green
122
4-window view
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
HMI sl Turning