Calibrating In The Reference Groove; General Information - Siemens SINUMERIK 840D sl Programming Manual

6.4.2

Calibrating in the reference groove

6.4.2.1

General information

Function
With this measuring cycle and the _MVAR=xxx13 measuring variant, it is possible to
calibrate a workpiece probe with cutting edge position SL=7 or SL=8 in a reference groove
machine-related in the axes of the plane (abscissa, ordinate).
Calibration is possible in one direction (_MVAR=x1x13) or in both directions of an axis
(_MVAR=x2x13).
It is also possible to calibrate the position deviation of the probe and the active diameter of
the probe ball in both directions.
Measuring cycles
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
Measuring Cycles for Turning Machines
6.4 CYCLE973 Calibrating workpiece probes
325