Presetting Measuring Cycle Support In Hmi Sl - Siemens SINUMERIK 840D sl Programming Manual

Input screen for measuring a hole, parallel with the axis, with protection zone (CYCLE977)
7.2.2

Presetting measuring cycle support in HMI sl

For descriptions of the default settings for measuring cycle support for HMI as of software
version 2.6, see:
References:
Commissioning Manual SINUMERIK 840d HMI sl base software and HMI sl;
Book HMI sl (IM9)
Chapter Configuring cycles; Configuring measuring cycles and measuring functions
Measuring cycles
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
7.2 Measuring cycle support in the program editor
Miscellaneous functions
369