Siemens SINUMERIK 840D sl Programming Manual page 276

Measuring Cycles for Turning Machines
6.2 CYCLE982 Tool: Measure turning tools
Recommended parameters
The following parameters are recommended so that this programming example runs reliably:
● Calibration:
● First-time measurement of a tool:
● Remeasure the tool:
276
_TZL=0.001 zero offset area
_TSA=1 safe area
_FA=1 measurement path
_TZL=0.001 zero offset area
_TDIF=3 dimension difference check
_TSA=3 safe area
_FA=3 measurement path
_TZL=0.001 zero offset area
_TDIF=0.3 dimension difference check
_TSA=1 safe area
_FA=1 measurement path
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
Measuring cycles