Siemens SINUMERIK 840D sl Programming Manual page 23
Measuring cycles hmi sl
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
NOTICE
• The measurement takes longer with mono probes since the spindle must be positioned
• In workpiece measurement, a bidirectional probe is treated like a mono probe.
• The mono- and bi-directional probe should only be used for minor precision
Table 1- 1
Probe assignment
Probe type
Multidirectional (multi probe)
Bidirectional
Monodirectional (mono
probe)
Note
If a workpiece probe is used, both the direction of deflection and transmission of switching
signal to the machine column (radio, infrared light or cable) must be taken into account.
In some versions, transmission is only possible in particular spindle positions or in particular
ranges.
This may further limit the use of the probe.
In any case, please follow the advice of the probe or machine manufacturer.
Measuring cycles
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
in the cycle several times by means of SPOS.
requirements!
Tool measurements
X
--
--
Turning machines
Workpiece measurements
X
X
--
General
1.6 Probes that can be used
Milling and machining
centers
Workpiece measurements
X
X
X
23
Advertisement
Table of Contents
