Table of Contents
Advertisement
Parameter Reference
The AiRanger DPL Plus is configured through its parameters, and the application
determines the parameter values which are entered into the unit.
Please check your value entries carefully before operating the AiRanger DPL Plus to
ensure optimum performance.
Helpful Hints
Please note the following:
•
Default values are always indicated with an asterix (*)
•
Global values are common for all inputs and outputs on the unit
•
Indexed parameters can apply to more than one input or output
•
Primary index relates to an input or output
•
Secondary index allows for multiple values on an indexed point
•
View only parameters are for display only and cannot be altered. These parameters
are marked as view only in the Parameter values.
In PROGRAM mode
1.
Press DISPLAY
2.
Key in the desired Parameter Number, (direct access) or press SCROLL
as required (scroll access).
(As preset, Quick Start Parameters, and previously altered parameters may be scroll
accessed ).
3.
Press DISPLAY
4.
Key in the desired Index, (direct access) or press SCROLL
(scroll access).
To alter the Parameter Value for all Indices at once, select Index 00.
5.
With the desired Parameter Number and Index displayed, key in the desired
Parameter Value and press ENTER
Notes:
•
Record each Parameter Value alteration on the appropriate Programming
Chart for future reference,in case complete reprogramming is required.
•
If Parameter Values cannot be altered, access the Lock parameter (P000) and
enter the security code (See Programming Security).
7ML19981BD02
as required to underline the Parameter Number display field.
as required to underline the Index display field.
AiRanger DPL Plus – INSTRUCTION MANUAL
.
or
or
as required
Page 27
Advertisement
Table of Contents
