Programming Examples 1 - Siemens SINUMERIK 840D sl Programming Manual

See also
Variable measuring velocity: _VMS (Page 76)
Tolerance parameters: _TZL, _TMV, _TUL, _TLL, _TDIF and _TSA (Page 77)
Measurement path: _FA (Page 78)
Probe type, probe number: _PRNUM (Page 79)
Empirical value, mean value: _EVNUM (Page 80)
Multiple measurement at the same location: _NMSP (Page 81)
5.2.5.2

Programming examples 1

Measuring the length and radius of a milling tool (machine-related)
Milling tool F3 with D1 is to be measured for the first time along length L1 and radius R (to
determine geometry).
The length measurement is to be performed with motionless spindle. Radius measurement is
to be performed with rotating spindle – in the X axis.
The tool has a specially shaped cutting edge and therefore requires an offset for
measurement.
A measured value deviation of < 1.6 mm compared with the entered values is expected.
Values of calibration tool T3 D1,
before the measurement:
Tool type (DP1):
Length 1 - geometry (DP3):
Radius - geometry (DP6):
Length 1 - wear (DP12):
Radius - wear (DP15):
Tool probe 1 is used. It has already been
calibrated under the same conditions.
Values: See programming example 1
"Calibration"
Measuring cycles
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
Measuring Cycles for Milling and Machining Centers
5.2 CYCLE971 tool: Measuring milling tools, drills
123
L1 = 70
R = 18
0
0
115