5.10.6
Programming via a screen form
5.10.6.1
General
Call "Measure kinematics" function - CYCLE996
Enter "Program" operating area in the part program editor
Press the following softkeys:
CYCLE996 screen forms
Two screen forms are offered for CYCLE996:
● "1st, 2nd, 3rd measurement" screen form
● "Calculate kinematics" screen form
Vertical softkey (VSK) functions:
The swivel data can be selected in accordance with the "Swivel cycle" startup menu (see
Programming Manual Cycles CYCLE800). This enables the user to check the data of the
selected swivel data record, or enter the basic kinematics data.
CYCLE996 has to be called three times in order to complete the entire measuring and vector
calculation process for one rotary axis. Between cycle calls, the user must reposition the
rotary axis to be measured. Any rotary axis that is not being measured must not be
repositioned during the measurement procedure. The linear axes are positioned on the
starting positions P1, P2, P3.
Measuring cycles
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
⇒
⇒
Measuring Cycles for Milling and Machining Centers
5.10 CYCLE996 workpiece: Measure kinematics
⇒
⇒
245