Parameters Of "1St, 2Nd, 3Rd Measurement" Screen Form - Siemens SINUMERIK 840D sl Programming Manual

Measuring Cycles for Milling and Machining Centers
5.10 CYCLE996 workpiece: Measure kinematics
5.10.6.2

Parameters of "1st, 2nd, 3rd measurement" screen form

Screen form
Name (Name/number of the swivel data record)
Select the swivel data records set in MD 18088: MM_NUM_TOOL_CARRIER The basic
kinematics data can be entered with VSK1 "Swivel data".
Parameter: _TNUM
Rotary axis (Name of rotary axis 1 or 2)
Select the name of the rotary axis of the swivel data record ($TC_CARR35/36).
Parameter: _MVAR
Measuring angle (Measuring angle with manual or semi-automatic rotary axes)
The entry field is only displayed if manual or semi-automatic rotary axes are declared in the
swivel data record→ see $TC_CARR37.
Parameters:
● _SETV[3] with rotary axis 1
● _SETV[4] with rotary axis 2 or with swivel head with manual rotary axes
Calibration ball (Calibration ball diameter)
Parameter: _SETVAL
248
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
Measuring cycles