Siemens SINUMERIK 840D sl Programming Manual page 388

Data description
9.2 Cycle data
_KB[ ]
Gauging block (pair of reference grooves)
Changes valid after value assignment
Data type REAL
Significance: Index "k" stands for the number of the current data field (_CALNUM-1)
Reference groove for calibration of a workpiece probe with cutting edge position SL=7 (tool type: 5xy)
_KB[k,0]
_KB[k,1]
_KB[k,2]
Reference groove for calibration of a workpiece probe with cutting edge position SL=8 (tool type: 5xy)
_KB[k,3]
_KB[k,4]
_KB[k,5]
_KB[k,6]
Note:
The values of the grooves are always machine-related and radius dimensions. Both grooves have the
same depth.
388
Min. input limit: -
Protection level: -
Groove edge in plus direction, ordinate
Groove edge in minus direction, ordinate
Groove base in abscissa
Groove edge in plus direction, abscissa
Groove edge in minus direction, abscissa
Upper edge groove in ordinate
Groove base in ordinate
Max. input limit: -
Unit: -
Applies as of SW SW 3.2
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
Preset default
0
0
0
0
0
0
0
Measuring cycles