See also
Variable measuring velocity: _VMS (Page 76)
Offset angle position: _CORA (Page 76)
Tolerance parameters: _TZL, _TMV, _TUL, _TLL, _TDIF and _TSA (Page 77)
Measurement path: _FA (Page 78)
Probe type, probe number: _PRNUM (Page 79)
Empirical value, mean value: _EVNUM (Page 80)
Multiple measurement at the same location: _NMSP (Page 81)
Measuring cycles
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
Measuring Cycles for Milling and Machining Centers
5.5 CYCLE978 workpiece: Measuring a surface parallel to the axis
165