Siemens SINUMERIK 840D sl Programming Manual page 304

Measuring Cycles for Turning Machines
6.3 CYCLE982 tool: Measure turning and milling tools
Parameter
Parameter
_MVAR
_MA
_MD
Additional parameters _VMS, _FA, _PRNUM and _NMSP also apply.
See also
Defining parameters (Page 63)
Result parameters (Page 65)
Variable measuring velocity: _VMS (Page 76)
Measurement path: _FA (Page 78)
Probe type, probe number: _PRNUM (Page 79)
Multiple measurement at the same location: _NMSP (Page 81)
304
Value Description
100000 Calibrate tool probe incrementally (machine-related) with calibration
tool
10100000 Calibrate tool probe incrementally (machine-related) with turning tool
Calibrate tool probe incrementally (workpiece-related) with calibration
100010 tool
Calibrate tool probe incrementally (workpiece-related) with turning
10100010 tool
1, 2 Measuring axis
0, 1 Measuring direction: 0 - positive, 1 - negative
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
Measuring cycles