Cycle977 Workpiece: Measure Hole/Shaft/Groove/Web/Rectangle Parallel To Axes; Function Overview - Siemens SINUMERIK 840D sl Programming Manual

Measuring Cycles for Milling and Machining Centers

5.4 CYCLE977 workpiece: Measure hole/shaft/groove/web/rectangle parallel to axes

5.4 CYCLE977 workpiece: Measure hole/shaft/groove/web/rectangle
parallel to axes
5.4.1

Function overview

Function
With this measuring cycle you can measure the dimensions of the following contour
elements on a workpiece using different measuring variants:
● Hole
● Shaft
● Groove
● Web
● Inside rectangle
● Outside rectangle
Measurement is performed paraxially to the workpiece coordinate system.
In some measuring variants defined safety zones are taken into account during the
measuring operation.
138
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
Measuring cycles