Controls in detail
Operating system
If malfunctions occur while you are driving,
the number of malfunctions will be shown
again in the display at the end of your jour-
ney (key in position 0 or removed from
the ignition lock). Each malfunction is dis-
played for approximately five seconds.
Press the reset button to display the next
malfunction immediately.
Press the reset button located on
the left of the instrument cluster
( page 126) repeatedly until you have
viewed all the malfunction messages.
i
All malfunction messages are cleared
from the malfunction memory when you
turn the key back to position 1 or 2 in
the ignition lock. Only the priority 1 mal-
functions will then be displayed. Should
any malfunctions reoccur, they are dis-
played once again.
138
Settings menu
The
SETTINGS...
menu has two functions:
The reset function:
BUTTON
which you can use to reset all
the settings to the factory settings
A collection of submenus which you
can use to make individual settings for
your vehicle
Press the è or ÿ button repeat-
edly until the
SETTINGS...
pears in the display.
P54.30-6076-31
(DE, EN, FR, SP, IT)
Nur fuer internen Gebrauch
Resetting all settings
You can reset the functions of all the sub-
menus to the factory settings.
RESET WITH RESET
To do this, press the reset button locat-
ed on the left-hand side of the instru-
ment cluster for approximately three
seconds.
The request prompting you to press the
reset button once more to confirm ap-
pears in the display.
menu ap-
Press the reset button again.
All the submenu functions are reset to
their factory settings.