Switching The Cooling With Air Dehumidification Function On/Off; Setting Climate Control To Automatic - Mercedes-Benz Actros Operating Instructions Manual

Only use demisting mode until the misted
R
windscreen is clear again.
Only use air-recirculation mode briefly, e.g.
R
if there are unpleasant odours or in dusty
conditions. The windscreen and the win-
dow may otherwise mist up as the flow of
fresh air is deactivated and the air inside
the vehicle is circulated.
Switching the cooling with air dehu-
midification function on/off
General notes
If the cooling with air dehumidification func-
tion is deactivated, the air inside the vehicle
will not be cooled (during warm weather) or
dehumidified. The windows may mist up more
quickly. Only switch the cooling with air dehu-
midification function off for short periods.
In order to cool the air inside the vehicle to the
set temperature, you must switch on cooling
with air dehumidification in vehicles with an
air-conditioning/automatic air-conditioning
system. The air inside the vehicle is then
cooled and dehumidified. This prevents the
windows and the windscreens from misting
up.
Condensation may appear on the underside
of the vehicle in cooling mode.
Air-conditioning system
X
Press button ¿ or Á.
If the indicator lamp in the button lights up,
the cooling with air dehumidification func-
tion is switched on.

Setting climate control to automatic

Automatic climate control
X
Press button Á.
If the indicator lamp in the button lights up,
the cooling with air dehumidification func-
tion is switched on.
or
X
Press one of buttons Ã.
If the indicator lamps in the buttons light
up, climate control is adjusted automati-
cally ( Y page 127).
Setting climate control to automatic
On vehicles with automatic climate control,
you can activate/deactivate automatic
mode. Automatic climate control regulates
the air distribution and airflow automatically
depending on the selected temperature and
activates the cooling with air dehumidifica-
tion function. In automatic mode, the airflow
or the air distribution can also be adjusted
manually.
X
To activate: set the temperature
( Y page 128).
X
Press one of buttons Ã.
If the indicator lamps in the buttons light
up, the automatic mode is activated.
X To deactivate automatic airflow or air
distribution: press button à in the air-
flow control or the air-distribution control
or
X
Set the airflow (
bution ( Y page 129).
The indicator lamp in the respective button
à goes out. Airflow or air distribution is
set according to the position of the thumb-
wheel.
X
To deactivate: press both of buttons Ã.
or
X
Set the airflow (
distribution (
The indicator lamps in buttons à go out.
The automatic air conditioning system
Y page 129) or air distri-
Y page 129) and the air
Y
page 129).
127
Z