Ld 117 Stat Serv Enhancement - Nortel 1000E Maintenance Manual

LD 117 STAT SERV enhancement

To display link-status information for Voice Gateway Media Cards that are
registered to a Call Server you can use the suite of Statistic Services (STAT
SERV) commands.
STAT SERV provides consolidated link-status information by application
type, IP address, host name, and IP Telephony Node ID.
STAT SERV status information includes the following:
•
•
•
•
•
•
•
•
•
•
pbxLink information
The STAT SERV command provides the following pbxLink information:
•
•
•
•
Application information
If an active link to an element is established, the Call Server obtains
information about the applications that run on the element.
Copyright © 2007, Nortel Networks
.
node ID
host name
ELAN IP address
element role
platform type
connection ID
enabled applications
registered and unregistered endpoints, such as IP Phones and Voice
Gateway Media Cards
information about the pbxLink and enabled applications
the Signaling Server resource count
the time the pbxLink was last established
the time the pbxLink was lost, if previously established
the time the pbxLink last attempted to establish a connection, if the
pbxLink failed to establish
the Signaling Server resource count, which helps to determine the
number of virtual trunks that you can configure.
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 01.02 Standard
Release 5.0 20 June 2007
LD 117 STAT SERV enhancement 185