Nortel 1000E Maintenance Manual page 109

9
10
11
Effective in CS 1000, Release 5.0, only users that have SEC_ADMIN
privileges can change the system time and date. For more information about
Release 5.0 security enhancements, see Security Management Fundamentals
(NN43001-604).
12
13
Copyright © 2007, Nortel Networks
.
If file verification fails, the system sends one of the following
messages:
Indicates a mismatch.
BKP0002
Corrective action:
Repeat the XVR command.
If verification fails again, repeat the restore and
reverify.
Check your communications package parameters.
Ensure that Mode = binary and Protocol = Xmodem.
Another possible cause is that the communications
package is stripping characters.
Received file contains invalid data.
BKP0003
Corrective action:
Perform an EDD to update the system file.
Repeat the verification using the XVR command.
Transmission error occurred due to a timeout or
BKP0008
excessive line noise.
Corrective action:
Repeat the procedure.
Type XSL to perform a sysload. The system responds with the
following:
CONFIRM? (Y/N).
Type Y to continue or N to cancel.
If you type Y, the system responds with the following:
PSWD?
Enter the password. The system responds with various
sysload-related messages and DONE when the sysload is complete.
Reset the correct time and date:
LD 2
STAD (day) (month) (year) (hour) (minute) (second)
Check the time and date entered:
TTAD
Customer configuration database restore is complete.
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 01.02 Standard
Release 5.0 20 June 2007
Customer Configuration Backup and Restore 109
ATTENTION