Nortel 1000E Maintenance Manual page 157

Procedure 45
Backing up Gatekeeper from the NRSM Web interface
Step
1
2
3
4
5
6
7
To restore the Gatekeeper from a floppy disk, follow the steps in
46 "Restoring the Gatekeeper from a floppy disk" (page
Procedure 46
Restoring the Gatekeeper from a floppy disk
Step
1
2
3
4
5
Copyright © 2007, Nortel Networks
.
Action
Get a 1.44 Mb floppy disk and label it with the following information:
GATEKEEPER BACKUP
IP ADDRESS:47.11.249.86
DATE: June 1, 2002
TIME: 10:15 AM
Make sure the disk is not write-protected.
Insert the labeled floppy disk into the floppy disk drive of the
Gatekeeper.
Log on to the NRSM Web interface as Administrator.
From the navigation tree, select Database Backup/Restore, click
Database Backup, and then click Backup.
Wait to receive confirmation message.
Remove the floppy disk from the drive.
Action
Get the correct floppy disk according to the label.
Insert the floppy disk in the floppy disk drive of the Gatekeeper.
Log into the NRSM Web interface as Administrator.
From the navigation tree, select Database Backup/Restore, click
Database Restore, and then click Restore.
Click one of these three options:
a. Restore both the database and configuration parameters
b. Restore only the database
c. Restore only the configuration parameters
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 01.02 Standard
Release 5.0 20 June 2007
Gatekeeper backup and restore 157
—End—
Procedure
157).