Circuit Card Features - Nortel 1000E Maintenance Manual

32 Hardware maintenance tools
Fixed Media Disk
The Fixed Media Disk (FMD) is internal to the CP PM card, accessible only
when the card is removed from the system. This flash card serves as a
hard drive. The internal card connects directly to the Advanced Technology
Attachment (ATA), also known as the hard drive controller in the chipset.
For CP PM Call Server application, assign switch S5 to position 1. Position
1 indicates that a Compact Flash device is used for the FMD. For CP PM
Signaling Server application, assign switch S5 to position 2.
Removable Media Disk
You can load CS 1000 software onto the CP PM Call Server through the
RMD.
To support hot insertion and removal, the faceplate card slot is controlled
through a PCI-to-CF bridge, but is treated as a standard ATA device.
When you insert or remove the faceplate CF (RMD), SRPTxxxx information
messages appear on the TTY and are written to the report log.
When you attempt to backup to the CF and the CF is missing from the
faceplate, TEMUxxxx error messages are issued .
For more information about message details, see Software Input/Output
Reference – System Messages (NN43001-712) .
Formatting a Removable Media Disk Compact Flash card
You can format the Removable Media Disk (RMD) CF card as a bootable or
a nonbootable device.
From PDT1 or PDT2, issue the format command as follows: formatCf2
{0,1}.
where
0 = a nonbootable device
1 = a bootable device
You can format a compact flash on a PC (Microsoft Windows 98SE,
Microsoft Windows 2000, or Microsoft Windows XP) for use as a compact
flash in the RMD. You format the disk in FAT16 - DOS format.

Circuit card features

Circuit card features describes various circuit cards and features.
Copyright © 2007, Nortel Networks
.
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 01.02 Standard
Release 5.0 20 June 2007