Nortel 1000E Maintenance Manual page 184

184 pbxLink connection
Displaying pbxLink information
Element Manager (EM)
To display pbxLink information in Element Manager, use the pbxLinkShow
command, as shown in
Element Manager" (page
To access the pbxLinkShow command in EM, follow the steps in
48 "Displaying pbxLink information in Element Manager" (page
Figure 24
Displaying pbxLink information in Element Manager
Procedure 48
Displaying pbxLink information in Element Manager
Step
1
2
3
4
5
CLI
To display the pbxLink information for a Meridian 1 or CS 1000 system, use
the LD 117 STAT SERV command at the Command Line Interface (CLI) of
the Call Server.
Copyright © 2007, Nortel Networks
.
Figure 24 "Displaying pbxLink information in
184).
Action
In the EM navigator System menu, select IP Network > Node
Maintenance and Reports .
The Node Maintenance and Reports page appears.
Click GEN CMD to the right of the Call Server information line.
Select pbxLink from the Group list.
Select pbxLinkShow from the Command list.
Click Run.
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 01.02 Standard
Release 5.0 20 June 2007
—End—
Procedure
184).