Ntdk83 And Ntdk99 Ip Daughterboard Leds - Nortel 1000E Maintenance Manual

52 Hardware maintenance tools
Initialize button
Similar to the Init button on the CS 1000E Core Call Server, the manual
initialize (Man Int) button on the SSC card starts the Initialize program.
The Initialize program can clear some equipment faults. It then rebuilds
call-dependent data, and generates system messages indicating the status
of the system. This process is called an initialization.

NTDK83 and NTDK99 IP daughterboard LEDs

The NTDK83 and NTDK99 IP daughterboard network interfaces each have
three LEDs for each IP network interface they contain. The LEDs provide
the status of the Layer2 network link to the IP daughterboards.
"NTDK83 and NTDK99 card circuit board LEDs" (page 52)
"NTDK83 and NTDK99 daughterboards LEDs" (page 52)
descriptions of these LEDs.
Figure 9
NTDK83 and NTDK99 card circuit board LEDs
Table 13
NTDK83 and NTDK99 daughterboards LEDs
LED State
Receive Red
Transmit Yellow
Copyright © 2007, Nortel Networks
.
CAUTION
SERVICE INTERRUPTION
Call processing is briefly interrupted during an initialization.
Definition
The information/data is being received.
Off No information/data is being received.
Information/data is being transmitted.
Off No information/data is being transmitted.
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 01.02 Standard
Release 5.0 20 June 2007
Figure 9
and Table 13
provide further