Mg 1000B Ip Phone Configuration; Mg 1000B Ip Phone Configuration Using; Procedure 12 Configuring Mg 1000B Ip Phones At The Main Office Using Ld 11 - Nortel 1000 Branch of?ce Installation And Commissioning Manual

218 Main office configuration
MG 1000B IP Phone configuration
After the Branch Office zones and passwords are provisioned, provision the
MG 1000B IP Phones at the main office. These can be provisioned using
TM 3.01 (see
218)) or LD 11 (see
main office using LD 11" (page
There is no automatic data synchronization between the main office
Call Server and MG 1000B Call Server. The technician must provision
the telephone on all pertinent Call Servers or MGCs. See
Import/Export facility in TM 3.01
using TM 3.01
to the Branch Office.
MG 1000B IP Phone configuration using TM 3.01
At the main office, TM 3.01 can be used to configure MG 1000B IP Phones.
Use Telephone Pages to configure the telephones to include the following:
•
•
•
•
•
Refer to the Telephony Manager 3.0: System Administration NTP for details.
MG 1000B IP Phone configuration using LD 11
Use
using LD 11" (page 218)
Phones.
Procedure 12
Configuring MG 1000B IP Phones at the main office using LD 11
Step
1
Copyright © 2007, Nortel Networks
.
3.01" (page 218)) or overlays (see
1000B IP Phones at the main office using LD 11" (page
"MG 1000B IP Phone configuration using TM 3.01" (page
Procedure 12 "Configuring MG 1000B IP Phones at the
for details on easily transferring the data from the main office
Terminal Type
TN
Customer Number
Branch Office Zone
Prime DN corresponding to the BUID
Procedure 12 "Configuring MG 1000B IP Phones at the main office
Action
Configure the Branch Office zones and dialing plan. See
9 "Configuring ESN and MG 1000B zones" (page
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Procedure 12 "Configuring MG
—End—
218)).
and Copying and Pasting IP Phone Data
at the main office to configure MG 1000B IP
218)).
Using the
Procedure
210).