102 Database management
Equipment Data Dump
Procedure 7
Performing a CP PII datadump
Step
1
2
3
4
5
Procedure 8
Performing a CP PIV or CP PM datadump:
Step
1
2
Copyright © 2007, Nortel Networks
.
Action
Log on to the system.
Insert a 2 MB floppy disk into the Multimedia Disk Unit (MMDU).
Load the Equipment Data Dump (EDD) program (LD 43).
LD 43
When EDD000 appears on the terminal, enter
EDD
CAUTION
Loss of Data
If the datadump does not succeed, do not continue.
Contact your technical support. You must correct a
datadump problem before you replace circuit cards or
upgrade the system.
The messages DATADUMP COMPLETE and DATABASE BACKUP
COMPLETE appear when the data dump is complete.
****
Action
Log on to the system.
Insert a CF card into the active Call Server RMD slot to back up
the database.
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 01.02 Standard
Release 5.0 20 June 2007
Load program
Begin the data dump
Exit program
—End—