Nortel 1000E Maintenance Manual page 117

4
Copyright © 2007, Nortel Networks
.
Replacing NTDW61 CP PM Signaling Server equipment 117
Enter <CR> at the Install Tool Menu.
The system attempts to validate and format the FMD partitions. The
following format occurs only if the onboard 1 GByte FMD is blank.
>Obtaining and checking system configuration ...
>Validate hard disk partitions
Validate number of hard drive partitions and
size ...
Disk check failed:
INST0010 Unable to validate Hard disk partition
"/u"
errNo : 0xd0001
Please press <CR> when ready ...
INST0010 Unable to validate Hard disk partition
"/p"
Please press <CR> when ready ...
INST0010 Unable to validate Hard disk partition
"/e"
Please press <CR> when ready ...
The Fix Media Device on Core x is blank.
Install cannot continue unless the FMD is
partitioned
Note: INSTALL WILL REBOOT AFTER THIS PROCEDURE
AND FIX MEDIA WILL BE EMPTY AFTER YOU PARTITION
IT.
INSTALL REMOVABLE MEDIA MUST BE IN THE DRIVE AT
THIS TIME.
Please enter:
<CR> -> <a> - Partition the Fix Media Device.
Enter choice>
>Repartitioning Fix Media Device ...
fdiskPartCreate(0x12d5ff0c, 1, 4, 0x10)
Size in sectors = 0x8000
Low boundary = 0 High boundary = 0x1e8bdf
fdiskPartCreate(0x12d5ff0c, 2, 11, 0x130)
Size in sectors = 0x98000
Low boundary = 0x7fc1
High boundary = 0x1e8bdf
fdiskPartCreate(0x12d5ff0c, 3, 11, 0x130)
Size in sectors = 0x98000
Low boundary = 0x9ffc1 High boundary = 0x1e8bdf
fdiskPartCreate(0x12d5ff0c, 4, 11, 0x130)
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 01.02 Standard
Release 5.0 20 June 2007
three partitions expected