Nortel 1000E Maintenance Manual page 148

148 Replacing equipment
7
8
9
10
11
Copyright © 2007, Nortel Networks
.
c. Remove the software daughterboard from the SSC card and
replace with a replacement software daughterboard of the same
family. Example: The NTSK11AF, providing the vintage is the
same.
OR
If the new card is not the same vintage but the same base
board, use a Software Delivery Card to install the software
daughterboard. Proceed to
If the new software daughterboard is the same vintage as the old
one, you do not need a Software Delivery Card for the install. After
power up, the card appears in the main menu. From the Install
menu, select item 1 "New System Installation - From software
daughterboard". Proceed to
If an NTTK25 or a programmed daughterboard of a different vintage
is being used, insert a Software Delivery card with the same release
and issue of software as the one being replaced into slot A of the
SSC card. You can then log into the system.
From the main menu, select item 4 "New System Installation - From
Software Delivery Card".
Proceed with the Installation Menu choices as described in
Communication Server 1000E Installation and Commissioning
(NN43041-310). When prompted for the choice of database, select
item 2 "Basic Configuration".
It is important to choose "Basic Configuration". Otherwise, the system
can invoke an EDD after loading the new software, which can overwrite
the customer data stored on the CPU.
After installing the software and rebooting the system, restore
customer backup configuration files:
•
If you used CCBR to back up to a PC, then use CCBR to restore.
If you used the XBK command to back up to a PC, then use the
RBK command in LD 143 to restore.
• Login and load LD 143.
• Need to perform an upgrade.
•
From the Main Menu, select item 3 "Utilities".
• Select item 1 "Restore".
•
Select item 1 "Backup Flash Drive".
• Confirm Restore database from the Backup Flash drive.
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 01.02 Standard
Release 5.0 20 June 2007
step 7 after system power up.
step 10.
ATTENTION