Configuring Branch Office Ip Phones At The Main Office Using Ld 11 - Nortel 1000 Configuration Manual

•
•
•
See Telephony Manager 3.1 System Administration (NN43050-601) for
details.
Branch office IP Phone configuration using LD 11
Use
using LD 11" (page 39)
Phones.
Procedure 2
Configuring branch office IP Phones at the main office using LD 11
Step
1
2
LD 11 Provision Branch User and SCPW at the main office
Prompt Response
REQ: NEW CHG
TYPE: a...a
CUST xx
ZONE 0-255
Copyright © 2005-2007, Nortel Networks
.
Branch office IP Phone configuration at the main office 39
Customer Number
Branch Office Zone
Prime DN corresponding to the BUID
Procedure 2 "Configuring branch office IP Phones at the main office
Action
Configure the branch office zones and dialing plan. See
1 "Configuring ESN and SRG zones" (page
Configure the following telephone data in LD 11:
• Terminal type
• Customer Number
•
TN
• Zone
• Prime DN to correspond to BUID
Description
Add new data, or change existing data.
Terminal type.
Type ? for a list of possible responses.
Customer number as defined in LD 15.
Zone number to which the IP Phone belongs.
The zone prompt applies only when the TYPE is 2001P2,
2002P1, 2002P2, 2004P1, 2004P2, 2050PC, 2007, 1110,
1120, 1140, 2210, 2211, 2212
Zone number is not checked against LD 117.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
at the main office to configure branch office IP
Procedure
34).