Nortel 1000E Maintenance Manual page 188

188 pbxLink connection
STAT SERV response
field
LDR
SRV
APPS
PBXLINK STATE
PBXLINK DATE/TIME
CONNECTED
Sets
VGWs
VTRK
SSRC
Copyright © 2007, Nortel Networks
.
Description
Specifies if the element is the Leader for the related node.
Value is YES or NO.
The element type.
Values are
• SMC – Media Card 32-port card
• ITGP – ITG-P 24-port card
• SS – Signaling Server
The application running on the element.
Values are
• LTPS
• VTRK
Tthe element current pbxLink state.
Values are
• LINK UP
• LOST
• FAILED
• INV CONN (element is connected, but its configuration was not
found on the Call Server, which indicates that this element might be
connected to the wrong Call Server)
When the element pbxLink state last changed.
The element connection ID.
Values are
• reg – the number of IP Phones registered to the element
• busy – the number of IP Phones that are currently busy
Values are
• reg – the number of voice gateways (DSP resources) are configured
on the element
• busy – the number of voice gateways (DSP resources) are
active/busy on the element
Values are
• reg – the number of VTRK channels are configured on the element
• busy – the number of VTRK channels are active/busy on the
element
Signaling Server capacity
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 01.02 Standard
Release 5.0 20 June 2007