Nortel 1000E Maintenance Manual page 62

62 Software maintenance tools
The maintenance requirements and the configuration of the system
determine the other programs included in Midnight and Background
Routines.
Table 16
Programs used in Midnight and Background Routines
LD
30
33
34
35
36
37
38
40
41
43 (Midnight only)
44
46
60 (Midnight only)
61 (Midnight only)
135
137
Overlay Loader
This resident program locates, loads, and checks all nonresident software
programs. It automatically activates the Midnight and Background Routines.
Load the Overlay programs manually by entering the commands through the
system terminal or maintenance telephone. When the program is loaded,
the program mnemonic (such as, TRK for Trunk Diagnostic) appears on
the system terminal.
Overload Monitor
The volume of system messages is continuously monitored by the system. If
too many error messages are detected from a line or trunk card, the system
activates the Overload Monitor program. The Overload Monitor disables the
faulty card and generates system messages with the mnemonic OVD.
Copyright © 2007, Nortel Networks
.
Program function
Network and Signaling Diagnostic
1.5 Mb/s Remote Peripheral Equipment Diagnostic
Tone and Digit Switch and Digitone Receiver
Core Equipment Diagnostic
Trunk Diagnostic 1
Input/Output Diagnostic
Conference Circuit Diagnostic
Call Detail Recording Diagnostic
Trunk Diagnostic 2
Data Dump
Software Audit
Multifrequency Sender Diagnostic
Digital Trunk Interface Diagnostic
Message Waiting Lamp
Core Equipment Diagnostic
Input/Output Diagnostic
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 01.02 Standard
Release 5.0 20 June 2007