Configuring Port Speed Down-Shift And Auto-Negotiation For A Range Of Ports - Brocade Communications Systems FastIron Administration Manual

Ethernet switch
Table of Contents

Advertisement

Configuring port speed down-shift and auto-negotiation for a range of
ports
Port speed down-shift and auto-negotiation can be configured for an entire range of ports with a single
command.
For example, to configure down-shift on ports 0/1/1 to 0/1/10 and 0/1/15 to 0/1/20 on the device, enter
the following.
Brocade(config)# link-config gig copper autoneg-control down-shift ethernet 0/1/1
to 0/1/10 ethernet 0/1/15 to 0/1/20
To configure down-shift on ports 5 to 13 and 17 to 19 on a compact switch, enter the following.
Brocade(config)# link-config gig copper autoneg-control down-shift ethernet 5 to 13
ethernet 17 to 19
Syntax: [no] link-config gig copperautoneg-control [ down-shift | 100m-auto | 10m-auto ] ethernet
port-list
NOTE
The <port-list> variable represents the list of ports to which the command will be applied.
For <port-list>, specify the ports in one of the following formats:
• FWS and FCX stackable switches – <stack-unit/slotnum/portnum>
• FSX 800 and FSX 1600 chassis devices – <slotnum/portnum>
• FESX compact switches – <portnum>
You can list all of the ports individually, use the keyword to to specify ranges of ports, or a combination
of both. To apply the configuration to all ports on the device, use the keyword all instead of listing the
ports individually.
The output from the show run command for this configuration will resemble the following.
Brocade# show run
Current configuration:
!
ver 04.0.00b64T7el
!
module 1 fgs-48-port-management-module
module 2 fgs-cx4-2-port-10g-module
!
link-config gig copper autoneg-control down-shift ethernet 0/1/1 to 0/1/10
ethernet 0/1/15 to 0/1/20
!
!
ip address 10.44.9.11 255.255.255.0
ip default-gateway 10.44.9.1
!
end
To disable selective auto-negotiation of 100m-auto on ports 0/1/21 to 0/1/25 and 0/1/30, enter the
following.
Brocade(config)# no link-config gig copper autoneg-control 100m-auto ethernet
0/1/21 to 0/1/25 ethernet 0/1/30
FastIron Ethernet Switch Administration Guide
53-1003625-01

Configuring port speed down-shift and auto-negotiation for a range of ports

61

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FastIron and is the answer not in the manual?

Table of Contents

Save PDF