TABLE 4
Field
peer dispersion
system poll interval Poll interval of the local system.
last update
server mode
client mode
master
master stratum
panic mode
Displaying NTP associations
Use the show ntp associations command to display detailed association information of the NTP
server or peers.
Brocade# show ntp associations
address ref clock st when poll reach delay offset disp
*~172.19.69.1 172.24.114.33 3 25 64 3 2.89 0.234 39377
~2001:235::234
INIT 16 - 64 0 0.00 0.000 15937
* synced, # selected, + candidate, - outlayer, x falseticker, ~ configured
The following table provides descriptions of the show ntp associations command output.
TABLE 5
Field
*
#
+
-
x
~
address IPv4 or IPv6 address of the peer.
ref clock IPv4 address or first 32 bits of the MD5 hash of the IPv6 address of the peer to which clock is
FastIron Ethernet Switch Administration Guide
53-1003625-01
NTP status command output descriptions (Continued)
Description
Dispersion of root path.
Time the router last updated its NTP information.
Status of the NTP server mode for this device.
Status of the NTP client mode for this device.
Status of the master mode.
Stratum number that will be used by this device when master is enabled and no upstream
time servers are accessible.
Status of the panic mode.
NTP associations command output descriptions
Description
The peer has been declared the system peer and lends its variables to the system variables.
This peer is a survivor in the selection algorithm.
This peer is a candidate in the combine algorithm.
This peer is discarded as outlier in the clustering algorithm.
This peer is discarded as 'falseticker' in the selection algorithm.
The server or peer is statically configured.
synchronized.
Displaying NTP associations
49
Need help?
Do you have a question about the FastIron and is the answer not in the manual?