show sysmon config
ECC one-time error detect = 0 ECC two-time error detect = 0
==========================
show sysmon config
Displays the complete sysmon configuration, including the global configuration and the event-specific
configuration.
Syntax
show sysmon config
Modes
User EXEC mode.
Privileged EXEC mode.
Examples
The following command displays the sysmon configuration an FSX device. The global configuration is
displayed first, followed by the configuration for specific events.
Brocade> show sysmon config
======================================
System Monitoring (Sysmon) is: enabled
Sysmon timer = 3 minutes
======================================
Threshold: Times error detected / Consecutive times event polling.
Log Backoff Number: Number of times skip log before log again.
======================================
Sysmon Event: FA_ERROR_COUNT (Enabled)
Threshold:
Log Backoff Number: 10
Action: log(internal) /syslog
Sysmon Event: FA_LINK (Enabled)
Threshold:
Log Backoff Number: 10
Action: log(internal) /syslog
Sysmon Event: XBAR_ERROR_COUNT (Enabled)
Threshold:
Log Backoff Number: 10
Action: log(internal) /syslog
Sysmon Event: XBAR_LINK (Enabled)
Threshold:
Log Backoff Number: 10
Action: log(internal) /syslog
Sysmon Event: PP_ERROR_COUNT (Enabled)
Threshold:
Log Backoff Number: 10
Action: log(internal) /syslog
The following example displays the sysmon configuration on an FCX device:
Brocade(config)#show sysmon config
======================================
System Monitoring (Sysmon) is: enabled
Sysmon timer = 3 minutes
======================================
Threshold: Times error detected / Consecutive times event polling.
Log Backoff Numner: Number of times skip log before log again.
======================================
Sysmon Event: LINK_STATUS (Enabled)
Threshold:
Log Backoff Number: 10
Action: log(internal) /syslog
Sysmon Event: ECC_STATS (Enabled)
Threshold:
Log Backoff Number: 10
Action: log(internal) /syslog
282
2/10
2/10
2/10
2/10
2/10
2/10
2/10
FastIron Ethernet Switch Administration Guide
53-1003625-01
Need help?
Do you have a question about the FastIron and is the answer not in the manual?