Brocade Communications Systems FastIron Administration Manual page 232

Network Monitoring
• show statistics
• show statistics brief
• show statistics ethernet
• show statistics management
NOTE
The port-statistics-reset-timestamp enable command must be configured to have the Elapsed
Timestamp information displayed in the output.
To display the statistics, enter a command such as the following.
device# show statistics ethernet 1/1/13
Port
1/1/13
748e.f893.065c
Port 1/1/13 Counters:
minute(s) 12 second(s)
InOctets
InPkts
InBroadcastPkts
InMulticastPkts
InUnicastPkts
InBadPkts
InFragments
InDiscards
CRC
InErrors
InGiantPkts
InShortPkts
InJabber
InFlowCtrlPkts
InBitsPerSec
InPktsPerSec
InUtilization
Syntax: show statistics [ ethernet | port ]
TABLE 33
Parameter
Port configuration
Port
Link
State
Dupl
Speed
Trunk
Tag
232
Link State Dupl Speed Trunk Tag Pvid Pri
Up Forward Full 1G
*Last time counter reset (Elapsed Timestamp): 1 hour(s) 21
50218819740
63180119
5
63180114
0
97441855
153280
100.00%
Port statistics in the show statistics command
Description
The port number.
The link state.
The STP state.
The mode (full-duplex or half-duplex).
The port speed.
The trunk group number, if the port is a member of a trunk group.
Whether the port is a tagged member of a VLAN.
None No 1
OutOctets
OutPkts
OutBroadcastPkts
OutMulticastPkts
OutUnicastPkts
OutErrors
Collisions
LateCollisions
OutFlowCtrlPkts
OutBitsPerSec
OutPktsPerSec
OutUtilization
FastIron Ethernet Switch Administration Guide
MAC Name
0
50216689676
63428168
3
63428165
97432612
153972
100.00%
53-1003625-01