Brocade Communications Systems FastIron Administration Manual page 312

Syslog messages
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
312
Port portnum , srcip-security max-ipaddr-per-int
reached.Last IP= ipaddr
The address limit specified by the srcip-security max-ipaddr-per-
interface command has been reached for the port.
Informational
Security: console login by username to USER |
PRIVILEGE EXEC mode
The specified user logged into the device console into the specified EXEC
mode.
Informational
Security: console logout by username
The specified user logged out of the device console.
Informational
Security: telnet | SSH login by username from src
IP i p-address , src MAC mac-address to USER |
PRIVILEGE EXEC mode
The specified user logged into the device using Telnet or SSH from either
or both the specified IP address and MAC address. The user logged into
the specified EXEC mode.
Informational
Security: telnet | SSH logout by username from
src IP ip-address, src MAC mac-address to USER |
PRIVILEGE EXEC mode
The specified user logged out of the device. The user was using Telnet or
SSH to access the device from either or both the specified IP address and
MAC address. The user logged out of the specified EXEC mode.
Informational
SNMP read-only community | read-write community |
contact | location | user | group | view |
engineld | trap [host] [ value -str ] deleted |
added | modified from console | telnet | ssh|
snmp session
FastIron Ethernet Switch Administration Guide
53-1003625-01