Brocade Communications Systems FastIron Administration Manual page 193

IronWare Version 07.3.00T7f3 compiled on Sep 26 2011 at
NOTE
The contents of the show command output will vary depending on which TLVs are configured to be
advertised.
Syntax:[no] lldp advertise system-description ports ethernet port-list | all
System name
The system name is the system administratively assigned name, taken from the sysName MIB object in
MIB-II. The sysName MIB object corresponds to the name defined with the CLI command hostname .
By default, the system name is automatically advertised when LLDP is enabled on a global basis. To
disable this advertisement, enter a command such as the following.
device(config)#no lldp advertise system-name ports e 2/4 to 2/12
The system name will appear similar to the following on the remote device, and in the CLI display output
on the Brocade device (show lldp local-info ).
System name:
Syntax:[no] lldp advertise system-name ports ethernet port-list | all
802.1 capabilities
Except for the VLAN name, the Brocade device will advertise the following 802.1 attributes when LLDP
is enabled on a global basis:
• VLAN name (not automatically advertised)
• Untagged VLAN ID
VLAN name
The VLAN name TLV contains the name and VLAN ID of a VLAN configured on a port. An LLDPDU
may include multiple instances of this TLV, each for a different VLAN.
To advertise the VLAN name, enter a command such as the following.
device(config)#lldp advertise vlan-name vlan 99 ports e 2/4 to 2/12
The VLAN name will appear similar to the following on the remote device, and in the CLI display output
on the Brocade device (show lldp local-info ).
VLAN name (VLAN 99): "Voice-VLAN-99"
Syntax:[no] lldp advertise vlan-name vlan vlan ID ports ethernet port-list | all
Forvlan ID , enter the VLAN ID to advertise.
FastIron Ethernet Switch Administration Guide
53-1003625-01
21:15:14 labeled as FCXR07300
"FCX624SHPOE-ADV Router"
802.1 capabilities
193