Show Sysmon Logs; Show Sysmon Counters - Brocade Communications Systems FastIron Administration Manual

show sysmon logs

Modes
Global configuration mode.
Examples The following example clears the fabric adaptor sysmon counters.
Brocade(config)# clear sysmon counters fa error all
show sysmon logs
Displays the entries written to syslog for all event types if the action specified is to log them into
syslog. If the action specified is none , the sysmon logs display nothing.
Syntax show sysmon logs
Modes Privileged EXEC mode.
Global configuration mode.
Examples
The following example displays the syslog entries that were made by sysmon if the action specified
either at the global level or type level was to log the events to syslog. If the action specified was none ,
no syslog entries exist.
Brocade(config)# show sysmon logs
Aug
Aug
Aug
Aug
Aug
The following table describes the output of this command:
TABLE 38
Field
Date and time
Critical or Warning
Sysmon
Event type
Component identifier
Error

show sysmon counters

Displays sysmon counters for all or specific event types.
278
Specifies that all stack units are cleared of errors.
3 03:59:22:C:Sysmon:XBAR LINK: SFM1/XBAR1/FPORT0 -- NO SYNC
3 03:59:22:C:Sysmon:FA Link: SLOT9/FA16/Link0 -- HG.Link error
3 03:58:22:W:Sysmon:PP ERROR: SLOT4/PP6
3 03:59:34:W:Sysmon:FA ERROR: SLOT1/FA0
3 03:60:34:W:Sysmon:XBAR ERROR: SFM1/XBAR1/FPORT2 -error
show sysmon log s command output fields
Description
Aug 3 03:59:22
A 'C' indicates a critical error and a 'W' indicates a warning.
Message coming from Sysmon
Possible values are FA ERROR, FA Link, XBAR ERROR, XBAR LINK, or PP ERROR
Identifies the component of the system where the error was detected
A brief description of the error
error occurred
error occurred
occurred
FastIron Ethernet Switch Administration Guide
53-1003625-01