Brocade Communications Systems FastIron Administration Manual page 305

Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
FastIron Ethernet Switch Administration Guide
53-1003625-01
A user has logged out of the USER EXEC mode of the CLI.
The user-name is the user name.
Informational
ACL ACL id added | deleted | modified from
console | telnet | ssh| snmp session
A user created, modified, deleted, or applied an ACL through an SNMP,
console, SSH, or Telnet session.
Informational
Bridge is new root, vlan vlan-id , root ID root-
id
A Spanning Tree Protocol (STP) topology change has occurred, resulting
in the Brocade device becoming the root bridge.
The vlan-id is the ID of the VLAN in which the STP topology change
occurred.
The root-id is the STP bridge root ID.
Informational
Bridge root changed, vlan vlan-id , new root ID
string , root interface portnum
A Spanning Tree Protocol (STP) topology change has occurred.
The vlan-id is the ID of the VLAN in which the STP topology change
occurred.
The root-id is the STP bridge root ID.
The portnum is the number of the port connected to the new root bridge.
Informational
Bridge topology change, vlan vlan-id , interface
portnum , changed state to stp-state
A Spanning Tree Protocol (STP) topology change has occurred on a port.
The vlan-id is the ID of the VLAN in which the STP topology change
occurred.
The portnum is the port number.
The stp-state is the new STP state and can be one of the following:
Syslog messages
305