Brocade Communications Systems FastIron Administration Manual page 279

Syntax show sysmon counters type { error | link }
show sysmon counters { ecc-error | link-error }
Parameters
type
error
link
ecc-error
stack-unit
all
link-error
stack-unit
all
Modes Privileged EXEC mode.
Global configuration mode.
Examples The following displays all fabric adaptor statistics on an FSX device:
Brocade# show sysmon counters fa link all
Sysmon FA HG.link error detected (number of times)
link1
SLOT
FC(RX,TX)
1
(0,0)
2
(0,0)
9
(0,0)
9
(0,0)
FastIron Ethernet Switch Administration Guide
53-1003625-01
The event type for which sysmon counters are displayed. For FSX devices, the options are
all, fa (fabric adapter), pp (packet processor), and xbar (cross bar). For FCX and ICX
devices, the options are ecc-error and link-error. The default value is all.
Displays the error counter for the specified event type.
Displays the link error counters. You can specify either all or specific links.
Displays the ECC error count on FCX and ICX devices. This option is not supported on FSX
devices.
Specifies the stack unit on which errors to be displayed.
Displays errors for all stack units.
Displays the link error count on FCX and ICX devices. This option is not supported on FSX
devices.
Specifies the stack unit on which errors to be displayed.
Displays errors for all stack units.
FA-link0
FA-link2
FA-dev Sync/FC(RX,TX)
Sync/FC(RX,TX)Sync/FC(RX,TX)
0 0/(0,0)
0/(0,0)
2 0/(0,0)
0/(0,0)
16 1751/(1750,1750)
0/(0,0)
17 0/(0,0)
0/(0,0)
FA-
FA-link3
Sync/
0/(0,0)
0/(0,0)
0/(0,0)
0/(0,0)
System Monitoring
0/
0/
0/
0/
279