Brocade Communications Systems FastIron Administration Manual page 303

Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
FastIron Ethernet Switch Administration Guide
53-1003625-01
No of prefixes received from BGP peer ip-addr
exceeds maximum prefix-limit...shutdown
The Layer 3 switch has received more than the specified maximum number
of prefixes from the neighbor, and the Layer 3 switch is therefore shutting
down its BGP4 session with the neighbor.
Error
IPv6: IPv6 protocol disabled on the device from
session-id
IPv6 protocol was disabled on the device during the specified session.
Informational
IPv6: IPv6 protocol enabled on the device from
session-id
IPv6 protocol was enabled on the device during the specified session.
Informational
MAC Filter applied to port port-id by username
from session-id (filter id= filter-ids )
Indicates a MAC address filter was applied to the specified port by the
specified user during the specified session.
session-id can be console, telnet, ssh, or snmp.
filter-ids is a list of the MAC address filters that were applied.
Informational
MAC Filter removed from port port-id by username
from session-id (filter id= filter-ids )
Indicates a MAC address filter was removed from the specified port by the
specified user during the specified session.
session-id can be console, telnet, ssh, or snmp.
filter-ids is a list of the MAC address filters that were removed.
Informational
Security: Password has been changed for user
username from session-id
Syslog messages
303