Brocade Communications Systems FastIron Administration Manual page 307

Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message
Level
FastIron Ethernet Switch Administration Guide
53-1003625-01
DOT1X: port portnum - MAC mac address Downloading
an IP ACL, but IP ACL have no effect on a switch
port
The RADIUS server returned an IP ACL, but the portnum is a switch port
(no IP address).
Informational
DOT1X:port portnum - MAC mac address Error -
could not add all MAC filters
The Brocade device was unable to implement the MAC address filters
returned by the RADIUS server.
Informational
DOT1X: port portnum - MAC mac address Invalid MAC
filter ID - this ID doesn't exist
The MAC address filter ID returned by the RADIUS server does not exist in
the Brocade configuration.
Informational
DOT1X: port portnum - MAC mac address Invalid MAC
filter ID - this ID is user defined and cannot be
used
The port was assigned a MAC address filter ID that had been dynamically
created by another user.
Informational
DOT1X: port portnum - MAC mac address is
unauthorized because system resource is not
enough or the invalid information to set the
dynamic assigned IP ACLs or MAC address filters
802.1X authentication failed for the Client with the specified mac address
on the specified portnum either due to insufficient system resources on the
device, or due to invalid IP ACL or MAC address filter information returned
by the RADIUS server.
Informational
Syslog messages
307