Brocade Communications Systems FastIron Administration Manual page 27

Syntax: show who
To display packet and session rejection statistics due to failure in management VRF validation, enter
the following command.
device(config)# show management-vrf
Management VRF name : sflow
Management Application
SNMP Engine
RADIUS Client
TFTP Client
Traps
SysLogs
TCP Connection rejects:
Telnet
SSH
TACACS+ Client
Syntax: show management-vrf
TABLE 3
This field
Management VRF name Displays the configured management VRF name.
Management Application Displays the management application names.
Rx Drop Pkts
Tx Drop Pkts
TCP Connection rejects
Make sure that the management VRF is configured before executing the show management-vrf
command. If not, the system displays the following error message.
Error - Management VRF is not configured.
To clear the management VRF rejection statistics, enter the following command.
device(config)# clear management-vrf-stats
Syntax: clear management-vrf-stats
FastIron Ethernet Switch Administration Guide
53-1003625-01
Rx Drop Pkts
: 0
(Strict): 685
: 0
show management-vrf output descriptions
Displays
Displays the number of packets dropped in the inbound traffic.
Displays the number of packets dropped in the outbound traffic.
Displays the number of TCP connections per application rejected due to management
VRF validation.
Management Applications
Tx Drop Pkts
0 11
0 0
0 0
- 0
- 0
27