Brocade Communications Systems FastIron Administration Manual page 388

Joint Interoperability Test Command
IPv6 ACL for SNMPv3 group
As part of the JITC requirement, from 08.0.20a release onwards, the IPv6 access list is supported for
the SNMPv3 group, and the incoming SNMP packets can be filtered based on the IPv6 ACL attached
to the group.
For more information, refer to
and specifying which view is notified of traps
388
Defining an SNMP group on page 152 and
on page 156.
Defining an SNMP group
FastIron Ethernet Switch Administration Guide
53-1003625-01