Brocade Communications Systems FastIron Administration Manual page 328

Ethernet switch
Table of Contents

Advertisement

Syslog messages
Message
Level
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
328
The rid ip-addr is the Brocade router ID.
The intf addr ip-addr is the IP address of the Brocade interface that received
the packet.
The pkt size num is the number of bytes in the packet.
The checksum num is the checksum value for the packet.
The pkt src addr ip-addr is the IP address of the neighbor that sent the
packet.
The pkt type type is the OSPF packet type and can be one of the following:
• hello
• database description
• link state request
• link state update
• link state acknowledgement
• unknown (indicates an invalid packet type)
Notification
OSPF intf rcvd bad pkt: Bad Packet type, rid ip-
addr, intf addr ip-addr , pkt size num , checksum
num , pkt src addr ip-addr , pkt type type
The device received an OSPF packet with an invalid type.
The parameters are the same as for the Bad Checksum message. The pkt
type type value is "unknown", indicating that the packet type is invalid.
Notification
OSPF intf rcvd bad pkt: Invalid packet size, rid
ip-addr, intf addr ip-addr, pkt size num ,
checksum num , pkt src addr ip-addr , pkt type
type
The device received an OSPF packet with an invalid packet size.
The parameters are the same as for the Bad Checksum message.
Notification
OSPF intf rcvd bad pkt: Unable to find associated
neighbor, rid ip-addr, intf addr ip-addr, pkt
size num , checksum num , pkt src addr ip-addr ,
pkt type type
The neighbor IP address in the packet is not in the list of OSPF neighbors
in the Brocade device.
The parameters are the same as for the Bad Checksum message.
FastIron Ethernet Switch Administration Guide
53-1003625-01

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FastIron and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents

Save PDF