Brocade Communications Systems FastIron Administration Manual page 311

Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
FastIron Ethernet Switch Administration Guide
53-1003625-01
A MAC Based VLAN has been enabled on a port.
Informational
MAC Filter added | deleted | modified from
console | telnet | ssh| snmp session filter id =
MAC filter ID , src MAC = Source MAC address |
any, dst MAC = Destination MAC address | any
A user created, modified, deleted, or applied this MAC address filter
through the SNMP, console, SSH, or Telnet session.
Informational
MSTP: BPDU-guard interface ethernet port-number
detect (Received BPDU), putting into err-disable
state.
BPDU guard violation occurred in MSTP.
Informational
OPTICAL MONITORING: port port-number is not
capable.
The optical transceiver is qualified by Brocade, but the transceiver does not
support digital optical performance monitoring.
Informational
Port p priority changed to n
A port priority has changed.
Informational
Port portnum , srcip-security max-ipaddr-per-int
reached.Last IP= ipaddr
The address limit specified by the srcip-security max-ipaddr-per-
interface command has been reached for the port.
Informational
Syslog messages
311