Resetting Lldp Statistics; Clearing Cached Lldp Neighbor Information - Brocade Communications Systems FastIron Administration Manual

Resetting LLDP statistics

To reset LLDP statistics, enter the clear lldp statistics command at the Global CONFIG level of the
CLI. The Brocade device will clear the global and per-port LLDP neighbor statistics on the device (refer
to Displaying LLDP statistics
device#clear lldp statistics
Syntax: clear lldp statistics [ ports ethernet port-list | all ]
If you do not specify any ports or use the keyword all , by default, the system will clear lldp statistics on
all ports.

Clearing cached LLDP neighbor information

The Brocade device clears cached LLDP neighbor information after a port becomes disabled and the
LLDP neighbor information ages out. However, if a port is disabled then re-enabled before the neighbor
information ages out, the device will clear the cached LLDP neighbor information when the port is re-
enabled.
If desired, you can manually clear the cache. For example, to clear the cached LLDP neighbor
information for port e 20, enter the following command at the Global CONFIG level of the CLI.
device#clear lldp neighbors ports e 20
Syntax: clear lldp neighbors [ ports ethernet port-list | all ]
If you do not specify any ports or use the keyword all , by default, the system will clear the cached
LLDP neighbor information for all ports.
FastIron Ethernet Switch Administration Guide
53-1003625-01
on page 210).

Resetting LLDP statistics

215