Show Sysmon System Sfm - Brocade Communications Systems FastIron Administration Manual

show sysmon system sfm

Displays the status of the switch fabric modules.
Syntax show sysmon system sfm { all | number }
Parameters
all
number
Modes
User EXEC mode.
Privileged EXEC mode.
Global configuration mode.
Usage Guidelines This command is supported only on FSX devices.
Examples The following command displays the statistics for all SFMs on the device.
Brocade(config)# show sysmon system sfm all
SFM= 1,Xbar= 2
X-link
=======================================================
SFM= 1,Xbar= 3
X-link
=======================================================
FastIron Ethernet Switch Administration Guide
53-1003625-01
Displays the statistics for all SFMs on the device.
Specifies the SFM ID for which the statistics is to be displayed.
Status FlowCtrl FA-dev/Link
2 OK 0x0
3 OK 0x0
4 OK 0x0
5 OK 0x0
7 OK 0x0
8 OK 0x0
9 OK 0x0
Status FlowCtrl FA-dev/Link
1 OK 0x0
2 OK 0x0
4 OK 0x0
5 OK 0x0
7 OK 0x0
10 OK 0x0
11 OK 0x0
Status FlowCtrl
19/0 OK 0x0
13/0 OK 0x0
0/1 OK --
3/0 OK 0x0
10/1 OK --
7/0 OK 0x0
17/0 OK 0x0
Status FlowCtrl
17/1 OK 0x0
3/1 OK 0x0
0/2 OK --
19/1 OK 0x0
10/2 OK --
7/1 OK 0x0
13/1 OK 0x0
show sysmon system sfm
283