Brocade Communications Systems FastIron Administration Manual page 315

Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
Message
Explanation
Message Level
FastIron Ethernet Switch Administration Guide
53-1003625-01
A user made Syslog configuration changes to the specified Syslog server
address, or enabled or disabled a Syslog operation through the SNMP,
console, SSH, or Telnet session.
Informational
SYSTEM: Optic is not Brocade-qualified ( port-
number )
Brocade does not support the optical transceiver.
Informational
System: Fan fan id (from left when facing right
side), ok
The fan status has changed from fail to normal.
Informational
System: Fan speed changed automatically to fan
speed
The system automatically changed the fan speed to the speed specified in
this message.
Informational
System: No free TCAM entry. System will be
unstable
There are no TCAM entries available.
Informational
System: Static MAC entry with MAC Address mac-
address is added from the unit / slot / port to
unit / slot / port on VLANs vlan-id to vlan-id
A MAC address is added to a range of interfaces, which are members of
the specified VLAN range.
Informational
Syslog messages
315