Authentication/Security Settings; System Administrator Settings - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

Tools

Authentication/Security Settings

In [Authentication/Security Settings], you can configure the registration and
authentication of a user and security settings.
Reference
The following shows the reference section for each setting.
"System Administrator Settings" (P.294)
"Authentication" (P.296)
"Allow User to Disable Active Settings" (P.305)
"Job Status Default" (P.306)
"Overwrite Hard Disk" (P.306)
1
On the [Tools] screen, select [Authentication/Security Settings].
Reference
2
Select an item to set or change.
5

System Administrator Settings

In [System Administrator Settings], you can set the system administrator ID and passcode.
We recommend setting the system administrator ID and passcode to prevent unauthorized
setting changes and ensure security.
System Administrator's Login ID
Set the system administrator's user ID. Enter the ID from 1 to 32 single-byte characters.
Note
1
Select [System Administrator's Login ID].
2
Select [On].
3
Select [Keyboard].
4
Enter the system administrator's ID with up to 32 characters, and then select [Save].
294
For more information about the feature, refer to "Authentication and Accounting Features" (P.409).
For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.118).
The default of the system administrator's user ID is "11111".