Fuji Xerox ApeosPort-V 3065 Administrator's Manual page 435

2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
Note
The default user ID is "11111".
The default passcode is "x-admin".
3
Select [Tools] on the Services Home screen.
4
Select [Accounting].
5
Select [Create/View User Accounts].
6
Select [<Available>], and then select [Create/Delete].
7
Enter a User ID and select [Save].
8
Select [Service Access].
9
Configure the [Service Access] and [Feature Access] settings for each service, and then
select [Save].
Reference
For more information on the service access, refer to "Service Access" (P.285).
10
If necessary, select a user role and an authorization group for the user under [User Role],
and then select [Save].
Note
[User Role] is displayed only when [Login Type] is set to [Login to Local Accounts].
Reference
For more information on the user role, refer to "User Role" (P.286).
11
Select [Close] repeatedly until the [Tools] screen is displayed.
12
Select [Close].
Configuration for Account Administration
14
435