Table of Contents
Advertisement
Error Code
027-442
[Cause]
The IP address of IPv6 already network exists.
[Remedy] Change the [Auto Stateless Address 1] for IPv6 on the machine,
or the IP address of IPv6 on the network device, to remove the
duplication of addresses.
027-443
[Cause]
The IP address of IPv6 already exists.
[Remedy] Change the [Auto Stateless Address 2] for IPv6 on the machine,
or the IP address of IPv6 on the network device, to remove the
duplication of addresses.
027-444
[Cause]
The IP address of IPv6 already exists.
[Remedy] Change the [Auto Stateless Address 3] for IPv6 on the machine,
or the IP address of IPv6 on the network device, to remove the
duplication of addresses.
027-445
[Cause]
IP address for IPv6 set manually is incorrect.
[Remedy] Set the IP address correctly.
027-446
[Cause]
The IP address of IPv6 set manually already exists.
[Remedy] Change the [Manually Configured IPv6 Address] on the
machine, or the IP address of IPv6 on the network device, to
remove the duplication of addresses.
027-447
[Cause]
The IP address of IPv6 already exists.
[Remedy] Change the [Link-local Address] for IPv6 on the machine, or the
IP address of IPv6 on the network device, to remove the
duplication of addresses.
027-452
[Cause]
IP address of IPv4 already exists.
[Remedy] Change the IP address of IPv4 set on the machine or the IP
address of IPv4 on the network device.
027-500
[Cause]
Unable to connect to the SMTP server.
[Remedy] Specify the SMTP server name correctly or specify the server by
using its IP address.
027-501
[Cause]
A POP server error occurred.
[Remedy] Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
027-502
[Cause]
Failed to log into the POP3 server when using the POP3 protocol.
[Remedy] Confirm whether the user name and password used in the POP3
server are correct on CentreWare Internet Services.
027-503
[Cause]
A POP server error occurred.
[Remedy] Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
027-504
[Cause]
An SMTP server error occurred.
[Remedy] Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
027-513
[Cause]
The machine failed to transfer data using SMB of the Scan to PC
service because access to the SMB server was not permitted.
[Remedy] Consult your system administrator for settings.
Cause and Remedy
Error Code
15
553
Advertisement
Table of Contents
