Fuji Xerox ApeosPort-V 3065 Administrator's Manual page 493

Hide thumbs Also See for ApeosPort-V 3065:
Table of Contents

Advertisement

Error Code
016-516
[Cause]
The Print Ticket included in the XPS document includes an
invalid description or a print setting not supported by the
machine.
[Remedy] Check whether there is a problem with the method of using the
application that sent the print job, or with the content of the
print instruction.
If your application usage and print instruction are correct, check
with the application manufacturer that sent the print job for
operations of the application, not with Fuji Xerox.
If the error still is not resolved, contact our Customer Support
Center.
Note
XPS stands for XML Paper Specification.
016-517
[Cause]
There is an error in the content described in the PostScript file.
[Remedy] Print with the PostScript driver. Furthermore, modify
ProcessColorModel described in the PostScript file so that the
color mode does not change.
016-518
[Cause]
With the PostScript driver, booklet and Watermark were
specified at the same time.
[Remedy] With the PostScript driver, specifying a combination of booklet
and Watermark/UUID is not possible. Cancel one of them.
016-519
[Cause]
The number of pages reached the maximum number of pages
specified, and the print job is terminated.
[Remedy] Have your system administrator change the maximum limit of
printable pages.
016-520
[Cause]
An error occurred in the high compression hardware.
[Remedy] Execute the operation again. Also change the output file format
and color mode.
If the problem is not resolved, switch off the machine power,
make sure that the touch screen is blank, and then switch on the
machine power. And then perform the above operation again.
If the error still is not resolved, contact our Customer Support
Center.
016-521
[Cause]
The IC Card Reader(optional) is disconnected from the machine
while scanning the data with digital signature.
[Remedy] Switch off the machine power and connect the IC Card Reader,
and then switch on the machine power.
016-522
[Cause]
LDAP server SSL authentication error. Unable to acquire an SSL
client certificate.
[Remedy] The LDAP server is requesting an SSL client certificate. Set an
SSL client certificate on the machine.
016-523
[Cause]
LDAP server SSL authentication error. The server certificate data
is incorrect.
[Remedy] The machine cannot trust the SSL certificate of the LDAP server.
Register the root certificate for the LDAP server's SSL certificate
to the machine.
Cause and Remedy
Error Code
15
493

Advertisement

Table of Contents
loading

Table of Contents